Lessons Learned About Plumbing

Different Types of Kitchen Plumbing

Plumbing services are considered to be one of the most sought after services of all time. From the case of laying out the piping, to the installation of hot water systems in a building, plumbers can choose to specialize on various fields. Some of the tasks that are being carried out by plumbers would be clean water supply systems, kitchen plumbing systems, gas systems and drainage systems. There actually are various aspects in kitchen plumbing systems which should be there for the kitchen to function efficiently.

Our kitchen is fitted with pipes that will supply clean water and other pipes that will be the one to get rid of the waste water. There also are other pipes of which supplies gas to the kitchen and gas valves are mostly being installed on the floor or on the wall. The hot and cold water valves are mostly being placed under sinks. From the supply valves, supply tubes are then being connected to the faucet.

The saddle valves could be attached to cold water valves for it to provide added water connections that will supply water to your water filter. The added connections could be made from plastic tubes or copper. Gas valves are usually found under appliances that uses gas and you could then shut it off if the gas is not used for safety purposes.

Pipes that are placed under the kitchen sink are usually curved and are also known as P-traps. Compression fittings are going to connect the curved pipes to the drainage pipe of the sink and you can in fact sometimes unscrew the fittings without the aid of any tool. In case you are planning to replace kitchen sink pipes, the plumber should carefully take the measurements of the pipes so that new pipes can be cut just right.

Water valves likewise are turned off to cut off the supply of water if repair work is still ongoing. P-trap connections also are unscrewed from the tailpieces of the sink through hand or through the use of pliers. The traps also are removed from the connections and the drain tailpieces also are going to be removed. New tailpieces are in fact screwed in and new pipes also are cut and fixed into place with the compression fittings by hand.

For you to keep your kitchen plumbing working efficiently, there actually are some things which you could do. One of such things would be where you have to make certain that you don’t pour grease or perhaps fatty substances down into your kitchen sink. You need to also avoid throwing leftover foods which are hard to grind and just throw them in the garbage disposal.